#!/bin/sh

### systemd startup script prelude for rwflowpack

# The canonical pathname for this file is
# /usr/libexec/silk/rwflowpack_startup

PROGRAM_NAME="rwflowpack"

# Which instance from a multiple-instance systemd config (i.e.
# "service@instance") this is, or blank if none.

SYSTEMD_INSTANCE_SUFFIX=""
if [ -n "$1" ]; then
    SYSTEMD_INSTANCE_SUFFIX=".$1"
fi

# The SYSTEMD_INSTANCE_SUFFIX is used as part of the filename of the
# config file, as well as the log file base name.

SCRIPT_CONFIG_FILENAME="${PROGRAM_NAME}${SYSTEMD_INSTANCE_SUFFIX}.conf"

### Above this from SiLK's src/startup/snippet-systemd_header.sh

### Below this from SiLK's src/startup/snippet-common_prelude.sh

# PROGRAM_NAME and SCRIPT_CONFIG_FILENAME should be set before this point.

# PROGRAM_NAME is the name of the executable program being managed by
# this script.

# SCRIPT_CONFIG_FILENAME is the name of the configuration file from
# which to read environment variables. Typically some variation on
# "${PROGRAM_NAME}.conf".

# SCRIPT_CONFIG_LOCATION is the directory where the
# ${SCRIPT_CONFIG_FILENAME} config file is located. It can be set via an
# environment variable. If the envar is not set, then /usr/etc is
# used.

# If $SCRIPT_CONFIG_LOCATION/sysconfig/$SCRIPT_CONFIG_FILENAME exists, a
# warning will be emitted (since the default location of these files has
# changed on some systems.)

SCRIPT_CONFIG="${SCRIPT_CONFIG_LOCATION:=/usr/etc}/${SCRIPT_CONFIG_FILENAME}"
DEPRECATED_SCRIPT_CONFIG="${SCRIPT_CONFIG_LOCATION}/sysconfig/${SCRIPT_CONFIG_FILENAME}"

if [ -f "$DEPRECATED_SCRIPT_CONFIG" ]; then
    echo "$0: *** WARNING: Config files should be placed directly in '${SCRIPT_CONFIG_LOCATION}', but '${DEPRECATED_SCRIPT_CONFIG}' exists." 1>&2
    echo "$0: *** WARNING: Move any existing configuration from '${DEPRECATED_SCRIPT_CONFIG}' to '${SCRIPT_CONFIG}'." 1>&2
fi

if [ ! -f "${SCRIPT_CONFIG}" ] ; then
    echo "$0: '${SCRIPT_CONFIG}' does not exist, exiting."
    exit 0
fi

. "${SCRIPT_CONFIG}"

if [ "x$ENABLED" = "x" ] ; then
    echo "$0: Not enabled in '${SCRIPT_CONFIG}', exiting." 1>&2
    exit 0
fi

#######################################################################
# SHELL FUNCTIONS

# check_empty VARNAME VALUE
#
#    Verifies that VALUE has a value.  If it doesn't, a message is
#    printed that the VARNAME variable is unset and script exits.
check_empty()
{
    if [ "x$2" = "x" ] ; then
        echo "$0: the \${$1} variable has not been set."
        exit 1
    fi
}

# check_dir VARNAME DIR
#
#    Verifies that VARNAME is set.  Next, verifies that the directory
#    DIR exists.  If not and if $CREATE_DIRECTORIES is set, the
#    directory is created.  Otherwise, an error is printed and the
#    script exits.
check_dir()
{
    check_empty "$1" "$2"
    if [ ! -d "$2" ] ; then
        if [ "${CREATE_DIRECTORIES}" = "yes" ] ; then
            mkdir -p "$2" || { echo "$0: Could not create $2" ; exit 1 ; }
            chown -h "${USER}" "$2" || { echo "$0: Could not chown $2 to ${USER}"; exit 1 ; }
        else
            echo "$0: the $2 directory does not exist."
            exit 1
        fi
    else
        chown -h "${USER}" "$2" || { echo "$0: Could not chown $2 to ${USER}"; exit 1 ; }
    fi
}

# Variables for building Basic Regular Expressions
TAB="	"                       # Contains a literal tab
WHITE="[ ${TAB}]"
WHITEPLUS="${WHITE}${WHITE}*"
NONWHITE="[^ ${TAB}]"
NONWHITEPLUS="${NONWHITE}${NONWHITE}*"
STRINGWHITE="\\(${NONWHITEPLUS}\\)${WHITEPLUS}"

# ws_strip STRING
#
#   Strips leading and trailing whitespace from STRING and returns it
ws_strip()
{
    echo $1 | sed -e "s/^${WHITE}*\\(${NONWHITEPLUS}\\(${WHITE}*${NONWHITEPLUS}\\)*\\)${WHITE}*\$/\\1/"
}

# cut_1 STRING
#
#    Returns first "token" from STRING or the empty string for an
#    empty STRING
cut_1()
{
    expr "x$1" : "x\\(${NONWHITE}*\\)"
}

# cut_2 STRING
#
#    Returns second "token" from STRING
cut_2()
{
    expr "x$1" : "x${NONWHITEPLUS}${WHITEPLUS}\\(${NONWHITEPLUS}\\)"
}

# cut_2rest STRING
#
#    Returns from second "token" to end of STRING
cut_2rest()
{
    expr "x$1" : "x${NONWHITEPLUS}${WHITEPLUS}\\(.*\\)"
}

# cut_3rest STRING
#
#    Returns from third "token" to end of STRING
cut_3rest()
{
    expr "x$1" : "x${NONWHITEPLUS}${WHITEPLUS}${NONWHITEPLUS}${WHITEPLUS}\\(.*\\)"
}

#######################################################################

RETVAL=0

PROGRAM_PATH="${BIN_DIR}/${PROGRAM_NAME}"

PROG_OPTIONS=""

if [ ! -x "${PROGRAM_PATH}" ] ; then
    echo "$0: could not find an executable ${PROGRAM_PATH}."
    exit 1
fi

### Below this from SiLK's src/rwflowpack/snippet-rwflowpack_startup.sh

check_empty "INPUT_MODE" "${INPUT_MODE}"
case "${INPUT_MODE}" in
    stream)
        check_empty "SENSOR_CONFIG" "${SENSOR_CONFIG}"
        PROG_OPTIONS="${PROG_OPTIONS} --sensor-configuration='${SENSOR_CONFIG}'"
        ;;
    fcfiles)
        check_empty "SENSOR_CONFIG" "${SENSOR_CONFIG}"
        PROG_OPTIONS="${PROG_OPTIONS} --input-mode=fcfiles"
        PROG_OPTIONS="${PROG_OPTIONS} --sensor-configuration='${SENSOR_CONFIG}'"
        ;;
    respool)
        PROG_OPTIONS="${PROG_OPTIONS} --input-mode=respool"
        ;;
    *)
        echo "$0: Unexpected INPUT_MODE ${INPUT_MODE}."
        echo "Set to \"stream\", \"fcfiles\", or \"respool\"."
        exit 1
        ;;
esac


if [ "x${COMPRESSION_TYPE}" != "x" ] ; then
    PROG_OPTIONS="${PROG_OPTIONS} --compression-method=${COMPRESSION_TYPE}"
fi
if [ "x${FILE_LOCKING}" = "x0" ] ; then
    PROG_OPTIONS="${PROG_OPTIONS} --no-file-locking"
fi
if [ "x${PACK_INTERFACES}" = "x1" ] ; then
    PROG_OPTIONS="${PROG_OPTIONS} --pack-interfaces"
fi
if [ "x${FLUSH_TIMEOUT}" != "x" ] ; then
    PROG_OPTIONS="${PROG_OPTIONS} --flush-timeout=${FLUSH_TIMEOUT}"
fi
if [ "x${FILE_CACHE_SIZE}" != "x" ] ; then
    PROG_OPTIONS="${PROG_OPTIONS} --file-cache-size=${FILE_CACHE_SIZE}"
fi
if [ "x${POLLING_INTERVAL}" != "x" ] ; then
    PROG_OPTIONS="${PROG_OPTIONS} --polling-interval=${POLLING_INTERVAL}"
fi
if [ "x${SITE_CONFIG}" != "x" ] ; then
    PROG_OPTIONS="${PROG_OPTIONS} --site-config-file='${SITE_CONFIG}'"
fi

if [ "x${PACKING_LOGIC}" != "x" ] ; then
    case "${INPUT_MODE}" in
        respool)
            ;;
        *)
            PROG_OPTIONS="${PROG_OPTIONS} --packing-logic='${PACKING_LOGIC}'"
            ;;
    esac
fi

if [ "x${ARCHIVE_DIR}" != "x" ] ; then
    check_dir "ARCHIVE_DIR" "${ARCHIVE_DIR}"
    PROG_OPTIONS="${PROG_OPTIONS} --archive-directory='${ARCHIVE_DIR}'"
    if [ "x${FLAT_ARCHIVE}" = "x1" ] ; then
        PROG_OPTIONS="${PROG_OPTIONS} --flat-archive"
    fi
fi
if [ "x${POST_ARCHIVE_COMMAND}" != "x" ] ; then
    if [ "x${ARCHIVE_DIR}" = "x" ]; then
        echo "$0: Use of POST_ARCHIVE_COMMAND requires valid ARCHIVE_DIR"
        exit 1
    fi
    PROG_OPTIONS="${PROG_OPTIONS} --post-archive-command='${POST_ARCHIVE_COMMAND}'"
fi
if [ "x${ERROR_DIR}" != "x" ] ; then
    check_dir "ERROR_DIR" "${ERROR_DIR}"
    PROG_OPTIONS="${PROG_OPTIONS} --error-directory='${ERROR_DIR}'"
fi

case "${INPUT_MODE}" in
    fcfiles|respool)
        check_dir "INCOMING_DIR" "${INCOMING_DIR}"
        PROG_OPTIONS="${PROG_OPTIONS} --incoming-directory='${INCOMING_DIR}'"
        ;;
    *)
        ;;
esac


check_empty "OUTPUT_MODE" "${OUTPUT_MODE}"
case "${OUTPUT_MODE}" in
    local-storage|local)
        check_dir "DATA_ROOTDIR" "${DATA_ROOTDIR}"
        PROG_OPTIONS="${PROG_OPTIONS} --output-mode=local-storage --root-directory='${DATA_ROOTDIR}'"
        ;;
    incremental-files)
        check_dir "INCREMENTAL_DIR" "${INCREMENTAL_DIR}"
        PROG_OPTIONS="${PROG_OPTIONS} --output-mode=incremental-files --incremental-directory='${INCREMENTAL_DIR}'"
        ;;
    remote|sending)
        check_dir "SENDER_DIR" "${SENDER_DIR}"
        check_dir "INCREMENTAL_DIR" "${INCREMENTAL_DIR}"
        PROG_OPTIONS="${PROG_OPTIONS} --output-mode=sending --sender-directory='${SENDER_DIR}' --incremental-directory='${INCREMENTAL_DIR}'"
        ;;
    *)
        echo "$0: Unexpected OUTPUT_MODE ${OUTPUT_MODE}."
        echo "Set to \"local-storage\" or \"incremental-files\"."
        exit 1
        ;;
esac

# Be certain EXTRA_ENVVAR ends with a space when it is non-empty
if [ "x${EXTRA_ENVVAR}" != "x" ]; then
    if [ "x${SILK_IPFIX_PRINT_TEMPLATES}" != "x" ]; then
        EXTRA_ENVVAR="${EXTRA_ENVVAR} SILK_IPFIX_PRINT_TEMPLATES=${SILK_IPFIX_PRINT_TEMPLATES} "
    else
        EXTRA_ENVVAR="${EXTRA_ENVVAR} "
    fi
elif [ "x${SILK_IPFIX_PRINT_TEMPLATES}" != "x" ]; then
    EXTRA_ENVVAR="SILK_IPFIX_PRINT_TEMPLATES=${SILK_IPFIX_PRINT_TEMPLATES} "
fi

### Below this from SiLK's src/startup/snippet-systemd_footer.sh
### systemd startup script footer: Final checks and execution.

# Always set the log level
PROG_OPTIONS="${PROG_OPTIONS} --log-level=${LOG_LEVEL}"

# And for systemd services, don't daemonize
PROG_OPTIONS="${PROG_OPTIONS} --no-daemon"

LOG_BASENAME="${PROGRAM_NAME}${SYSTEMD_INSTANCE_SUFFIX}"
case "${LOG_TYPE}" in
    syslog)
        PROG_OPTIONS="${PROG_OPTIONS} --log-destination=syslog"
        ;;
    legacy)
        check_dir "LOG_DIR" "${LOG_DIR}"
        PROG_OPTIONS="${PROG_OPTIONS} --log-directory=${LOG_DIR} --log-basename=${LOG_BASENAME}"
        ;;
    *)
        echo "$0: Unexpected LOG_TYPE ${LOG_TYPE}."
        echo "Set to \"legacy\" or \"syslog\"."
        exit 1
        ;;
esac

#######################################################################
/bin/echo "Starting ${PROGRAM_NAME}${SYSTEMD_INSTANCE_SUFFIX}"

if [ X`whoami` = "X${USER}" ] ; then
    eval "${EXTRA_ENVVAR} exec ${PROGRAM_PATH} ${PROG_OPTIONS} ${EXTRA_OPTIONS}"
else
    exec su - ${USER} -c "${EXTRA_ENVVAR} exec ${PROGRAM_PATH} ${PROG_OPTIONS} ${EXTRA_OPTIONS}"
fi


#######################################################################
# @OPENSOURCE_LICENSE_START@
#
# SiLK 3.24
#
# Copyright 2025 Carnegie Mellon University.
#
# NO WARRANTY. THIS CARNEGIE MELLON UNIVERSITY AND SOFTWARE ENGINEERING
# INSTITUTE MATERIAL IS FURNISHED ON AN "AS-IS" BASIS. CARNEGIE MELLON
# UNIVERSITY MAKES NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR
# IMPLIED, AS TO ANY MATTER INCLUDING, BUT NOT LIMITED TO, WARRANTY OF
# FITNESS FOR PURPOSE OR MERCHANTABILITY, EXCLUSIVITY, OR RESULTS
# OBTAINED FROM USE OF THE MATERIAL. CARNEGIE MELLON UNIVERSITY DOES NOT
# MAKE ANY WARRANTY OF ANY KIND WITH RESPECT TO FREEDOM FROM PATENT,
# TRADEMARK, OR COPYRIGHT INFRINGEMENT.
#
# Licensed under a GNU GPL 2.0-style license, please see LICENSE.txt or
# contact permission@sei.cmu.edu for full terms.
#
# [DISTRIBUTION STATEMENT A] This material has been approved for public
# release and unlimited distribution.  Please see Copyright notice for
# non-US Government use and distribution.
#
# This Software includes and/or makes use of Third-Party Software each
# subject to its own license.
#
# DM25-0915
#
# @OPENSOURCE_LICENSE_END@
#######################################################################
